HOW TO....

How To Set Up the LUMii BLACK Kit

Want to know how to set up a LUMii BLACK Light Kit? Watch the video to find out how.

For more information on LUMii BLACK products click here

Guide To Starting a Budget Set Up

This is the guide to starting a budget set up with a LightHouse LITE 1.2m Tent, LUMii Compacta, LUMii SunBlaster, LUMii MAXii Reflector, LUMii Heavy Duty Timer, LUMii Rope Ratchets, RAM Filter, RAM Inline Duct Fan, RAM Ducting, and RAM Variispeed.

Propagation Tent Setup - LightHouse Clone

The LightHouse Clone 1 is the perfect propagation tent or small growing area. It will allow you to keep control of the immediate  growing environment despite the temperatures outside.



Here's some tips on how to construct the tent!

SOLAR lamp fitting

Having problems fitting your SOLAR GRO or PRO lamp into the lighting fixture? Here's how....

How To Set Up - Lighthouse 3kW Greenhouse Heater

Want to know how to set up your new LightHouse 3kW Greenhouse Heater? Follow these easy steps and you'll be ready to go in no time.

PowerPlant Mantis Reflector Setup

The PowerPlant Mantis is an innovative, flexible reflector that allows you to adjust the angle at which your light is being reflected. The reflector is simple to assemble and whether you have purchased the single ended or double ended version of the Mantis, the method of assembly is the same.

Firstly, attach the arms of the reflector to the spine, using the screws provided - there is no need to tighten these screws with a screwdriver, just tighten them manually.

Next, take the reflective wings and insert their tabs through the spine of the reflector. Now you need to decide the angle at which you want your light to be reflected.  Line up the bolts at the ends of the reflective wings with the notches in the arms of the reflector. 

Positioning the bolts at the top notch gives a wide angle of reflection – this will cover a wider area beneath the reflector.  Positioning the bolts at the bottom notch will gives a very tight angle, meaning that the light being reflected will not cover such a wide area, but it will be more concentrated.

Once you have adjusted the reflective wings and you are happy with their position, remove the protective film.  It is very important that you do this before you use your reflector.

Hang your reflector above your plants using the brackets on top of the reflector.  Make sure the reflector is hung well above the canopy to prevent the plants from getting heat damage.